flytectl get execution#

Gets execution resources.

Synopsis#

Retrieve all executions within the project and domain.

flytectl get execution -p flytesnacks -d development

Note

The terms execution/executions are interchangeable in these commands.

Retrieve executions by name within the project and domain.

flytectl get execution -p flytesnacks -d development oeh94k9r2r

Retrieve all the executions with filters.

flytectl get execution -p flytesnacks -d development --filter.fieldSelector="execution.phase in (FAILED;SUCCEEDED),execution.duration<200"

Retrieve executions as per the specified limit and sorting parameters.

flytectl get execution -p flytesnacks -d development --filter.sortBy=created_at --filter.limit=1 --filter.asc

Retrieve executions present in other pages by specifying the limit and page number.

flytectl get -p flytesnacks -d development execution --filter.limit=10 --filter.page=2

Retrieve executions within the project and domain in YAML format.

flytectl get execution -p flytesnacks -d development -o yaml

Retrieve executions within the project and domain in JSON format.

flytectl get execution -p flytesnacks -d development -o json

Get more details of the execution using the –details flag, which shows node and task executions. The default view is a tree view, and the TABLE view format is not supported on this view.

flytectl get execution -p flytesnacks -d development oeh94k9r2r --details

Fetch execution details in YAML format. In this view, only node details are available. For task, pass the –nodeID flag.

flytectl get execution -p flytesnacks -d development oeh94k9r2r --details -o yaml

Fetch task executions on a specific node using the –nodeID flag. Use the nodeID attribute given by the node details view.

flytectl get execution -p flytesnacks -d development oeh94k9r2r --nodeID n0

Task execution view is available in YAML/JSON format too. The following example showcases YAML, where the output contains input and output data of each node.

flytectl get execution -p flytesnacks -d development oeh94k9r2r --nodID n0 -o yaml

Usage

flytectl get execution [flags]

Options#

    --details                       gets node execution details. Only applicable for single execution name i.e get execution name --details
    --filter.asc                    Specifies the sorting order. By default flytectl sort result in descending order
    --filter.fieldSelector string   Specifies the Field selector
    --filter.limit int32            Specifies the limit (default 100)
    --filter.page int32             Specifies the page number,  in case there are multiple pages of results (default 1)
    --filter.sortBy string          Specifies which field to sort results  (default "created_at")
-h, --help                          help for execution
    --nodeID string                 get task executions for given node name.

Options inherited from parent commands#

    --admin.authType string                      Type of OAuth2 flow used for communicating with admin.ClientSecret, Pkce, ExternalCommand are valid values (default "ClientSecret")
    --admin.authorizationHeader string           Custom metadata header to pass JWT
    --admin.authorizationServerUrl string        This is the URL to your IdP's authorization server. It'll default to Endpoint
    --admin.caCertFilePath string                Use specified certificate file to verify the admin server peer.
    --admin.clientId string                      Client ID (default "flytepropeller")
    --admin.clientSecretEnvVar string            Environment variable containing the client secret
    --admin.clientSecretLocation string          File containing the client secret (default "/etc/secrets/client_secret")
    --admin.command strings                      Command for external authentication token generation
    --admin.defaultServiceConfig string
    --admin.endpoint string                      For admin types,  specify where the uri of the service is located.
    --admin.insecure                             Use insecure connection.
    --admin.insecureSkipVerify                   InsecureSkipVerify controls whether a client verifies the server's certificate chain and host name. Caution : shouldn't be use for production usecases'
    --admin.maxBackoffDelay string               Max delay for grpc backoff (default "8s")
    --admin.maxRetries int                       Max number of gRPC retries (default 4)
    --admin.perRetryTimeout string               gRPC per retry timeout (default "15s")
    --admin.pkceConfig.refreshTime string         (default "5m0s")
    --admin.pkceConfig.timeout string             (default "15s")
    --admin.scopes strings                       List of scopes to request
    --admin.tokenRefreshWindow string            Max duration between token refresh attempt and token expiry. (default "0s")
    --admin.tokenUrl string                      OPTIONAL: Your IdP's token endpoint. It'll be discovered from flyte admin's OAuth Metadata endpoint if not provided.
    --admin.useAuth                              Deprecated: Auth will be enabled/disabled based on admin's dynamically discovered information.
-c, --config string                              config file (default is $HOME/.flyte/config.yaml)
-d, --domain string                              Specifies the Flyte project's domain.
    --files.archive                              Pass in archive file either an http link or local path.
    --files.assumableIamRole string              Custom assumable iam auth role to register launch plans with.
    --files.continueOnError                      Continue on error when registering files.
    --files.destinationDirectory string          Location of source code in container.
    --files.dryRun                               Execute command without making any modifications.
    --files.enableSchedule                       Enable the schedule if the files contain schedulable launchplan.
    --files.force                                Force use of version number on entities registered with flyte.
    --files.k8ServiceAccount string              Deprecated. Please use --K8sServiceAccount
    --files.k8sServiceAccount string             Custom kubernetes service account auth role to register launch plans with.
    --files.outputLocationPrefix string          Custom output location prefix for offloaded types (files/schemas).
    --files.sourceUploadPath string              Deprecated: Update flyte admin to avoid having to configure storage access from flytectl.
    --files.version string                       Version of the entity to be registered with flyte which are un-versioned after serialization.
    --logger.formatter.type string               Sets logging format type. (default "json")
    --logger.level int                           Sets the minimum logging level. (default 3)
    --logger.mute                                Mutes all logs regardless of severity. Intended for benchmarks/tests only.
    --logger.show-source                         Includes source code location in logs.
-o, --output string                              Specifies the output type - supported formats [TABLE JSON YAML DOT DOTURL]. NOTE: dot, doturl are only supported for Workflow (default "TABLE")
-p, --project string                             Specifies the Flyte project.
    --storage.cache.max_size_mbs int             Maximum size of the cache where the Blob store data is cached in-memory. If not specified or set to 0,  cache is not used
    --storage.cache.target_gc_percent int        Sets the garbage collection target percentage.
    --storage.connection.access-key string       Access key to use. Only required when authtype is set to accesskey.
    --storage.connection.auth-type string        Auth Type to use [iam, accesskey]. (default "iam")
    --storage.connection.disable-ssl             Disables SSL connection. Should only be used for development.
    --storage.connection.endpoint string         URL for storage client to connect to.
    --storage.connection.region string           Region to connect to. (default "us-east-1")
    --storage.connection.secret-key string       Secret to use when accesskey is set.
    --storage.container string                   Initial container (in s3 a bucket) to create -if it doesn't exist-.'
    --storage.defaultHttpClient.timeout string   Sets time out on the http client. (default "0s")
    --storage.enable-multicontainer              If this is true,  then the container argument is overlooked and redundant. This config will automatically open new connections to new containers/buckets as they are encountered
    --storage.limits.maxDownloadMBs int          Maximum allowed download size (in MBs) per call. (default 2)
    --storage.stow.config stringToString         Configuration for stow backend. Refer to github/flyteorg/stow (default [])
    --storage.stow.kind string                   Kind of Stow backend to use. Refer to github/flyteorg/stow
    --storage.type string                        Sets the type of storage to configure [s3/minio/local/mem/stow]. (default "s3")

SEE ALSO#

  • flytectl get - Fetches various Flyte resources such as tasks, workflows, launch plans, executions, and projects.